Development of a magnetic solid‐phase extraction coupled with high‐performance liquid chromatography method for the analysis of polyaromatic hydrocarbons

A novel magnetic solid phase extraction coupled with high‐performance liquid chromatography method was established to analyze polyaromatic hydrocarbons in environmental water samples. The extraction conditions, including the amount of extraction agent, extraction time, pH and the surface structure of the magnetic extraction agent, were optimized. The results showed that the amount of extraction agent and extraction time significantly influenced the extraction performance. The increase in the specific surface area, the enlargement of pore size, and the reduction of particle size could enhance the extraction performance of the magnetic microsphere. The optimized magnetic extraction agent possessed a high surface area of 1311 m²/g, a large pore size of 6–9 nm, and a small particle size of 6–9 μm. The limit of detection for phenanthrene and benzo[g,h,i]perylene in the developed analysis method was 3.2 and 10.5 ng/L, respectively. When applied to river water samples, the spiked recovery of phenanthrene and benzo[g,h,i]perylene ranged from 89.5–98.6% and 82.9–89.1%, respectively. Phenanthrene was detected over a concentration range of 89–117 ng/L in three water samples withdrawn from the midstream of the Huai River, and benzo[g,h,i]perylene was below the detection limit.     

Practical method for the rapid screening of xanthine oxidase inhibitors in herbal extracts by high‐performance liquid chromatography based on on‐line precolumn enzymatic reaction

A high‐performance liquid chromatography method with on‐line precolumn enzymatic reaction for the screening of xanthine oxidase inhibitors in natural extracts was developed. In this method, the enzymatic reaction occurred at the capillary inlet during a predetermined waiting period, after which the reaction product, uric acid, was separated and detected by liquid chromatography using ultraviolet absorption at 295 nm. Enzyme inhibition can be read out directly from the reduced peak area of uric acid in comparison to a reference chromatogram obtained in the absence of any inhibitor. In the present study, the availability of on‐line precolumn enzymatic reaction with ultraviolet detection was firstly evaluated by determining the inhibitory mechanism and IC₅₀ values of allopurinol, a commercially available positive drug. Then, the newly developed method was applied to screening of ten natural extracts from traditional Chinese medicine and as a result, the extract of Epimedium sagittatum (Sieb. et Zucc.) Maxim was found to be most positive for xanthine oxidase inhibition. The results obtained were compared with those obtained by offline enzyme assay and the effectiveness of the present method was confirmed. A rapid, low‐cost, and fully automated method for xanthine oxidase inhibitor screening was proposed.     

Dispersive liquid–liquid microextraction based on amine‐functionalized Fe3O4 nanoparticles for the determination of phenolic acids in vegetable oils by high‐performance liquid chromatography with UV detection

A novel dispersive liquid–liquid microextraction method based on amine‐functionalized Fe₃O₄ magnetic nanoparticles was developed for the determination of six phenolic acids in vegetable oils by high‐performance liquid chromatography. Amine‐functionalized Fe₃O₄ was synthesized by a one‐pot solvothermal reaction between Fe₃O₄ and 1,6‐hexanediamine and characterized by transmission electron microscopy and Fourier transform infrared spectrophotometry. A trace amount of phosphate buffer solution (extractant) was adsorbed on bare Fe₃O₄‐NH₂ nanoparticles by hydrophilic interaction to form the “magnetic extractant”. Rapid extraction could be achieved while the “magnetic extractant” on amine‐functionalized Fe₃O₄ nanoparticles was dispersed in the sample solution by vortexing. After extraction, the “magnetic extractant” was collected by application of an external magnet. Some important parameters, such as pH and volume of extraction and desorption solvents, the extraction and desorption time needed were carefully investigated and optimized to achieve the best extraction efficiency. Under the optimal conditions, satisfactory extraction recoveries were obtained for the six phenolic acids in the range of 84.2–106.3%. Relative standard deviations for intra‐ and inter‐day precisions were less than 6.3 and 10.0%, respectively. Finally, the established method was successfully applied for the determination of six phenolic acids in eight kinds of vegetable oils.     

Mesoporous inorganic salts with crystal defects: unusual catalysts and catalyst supports

We proposed a strategy to synthesize mesoporous inorganic salt particles using the special properties of ionic liquid (IL) mixtures, and hollow mesoporous LaF₃, NdF₃, and YF₃ particles were synthesized and characterized using different techniques. The size of the mesopores in the salt particles was about 4 nm, and the materials were full of crystal defects. The LaF₃, NdF₃ and YF₃ particles were used as the catalysts for the cyanosilylation reaction of benzaldehyde using trimethylsilyl cyanide, and Ru/LaF₃ and Ru/NdF₃, in which Ru nanocatalysts were supported on the LaF₃ and NdF₃ particles with mesopores, were used to catalyze hydrogenations of benzene to cyclohexane and levulinic acid (LA) to γ-valerolactone (GVL). It was discovered that the activities of these catalysts were unprecedentedly high for these reactions. Detailed study showed that both the crystal defects and the mesopores in the salt particles played crucial roles for the extremely high catalytic activity.     

Three 1‐phenylindolin‐2‐one derivatives displaying different molecular dipole moments and different crystallographic symmetries

Three 1‐phenylindolin‐2‐one derivatives, namely 1‐phenylindolin‐2‐one, C₁₄H₁₁NO, (I), 5‐bromo‐1‐phenylindolin‐2‐one, C₁₄H₁₀BrNO, (II), and 5‐iodo‐1‐phenylindolin‐2‐one, C₁₄H₁₀INO, (III), have been synthesized and their structures determined. Compounds (I) and (II) crystallized in the centrosymmetric space groups Pbca and P2₁/c, respectively, while compound (III) crystallized in the polar space group Aea2. Density functional theory (DFT) calculations show that the molecular dipole moment gradually decreases in the order (I) > (II) > (III). The relatively smaller dipole moment of (III) and the larger non‐electrostatic intermolecular interactions may be the main reasons for the noncentrosymmetric and polar structure of (III).     

微波消解-磷钼蓝分光光度法测定钨矿石中的磷含量

针对钨矿石中的微量元素磷,采用混合酸快速微波消解结合磷钼蓝分光光度法进行测定。经选择优化样品的微波消解和实验测定条件,结果表明:HCl+HNO3+HF的混合酸微波消解后的样品,在硫酸介质中,有钼酸铵存在时,用抗坏血酸将磷还原成磷钼蓝络合物,在825nm处比色测定。方法的加标回收率为98.9%~101.6%,结果准确可靠。硅在熔样过程中挥发除去不会干扰测定,砷会干扰实验,可在酸介质中加入碘化钾,使砷还原至低价而不干扰磷的测定。     

A mixed-finite volume element coupled with the method of characteristic fractional step difference for simulating transient behavior of semiconductor device of heat conductor and its numerical analysis

The mathematical system is formulated by four partial differential equations combined with initialboundary value conditions to describe transient behavior of three-dimensional semiconductor device with heat conduction. The first equation of an elliptic type is defined with respect to the electric potential, the successive two equations of convection dominated diffusion type are given to define the electron concentration and the hole concentration, and the fourth equation of heat conductor is for the temperature. The electric potential appears in the equations of electron concentration, hole concentration and the temperature in the formation of the intensity. A mass conservative numerical approximation of the electric potential is presented by using the mixed finite volume element, and the accuracy of computation of the electric intensity is improved one order. The method of characteristic fractional step difference is applied to discretize the other three equations, where the hyperbolic terms are approximated by a difference quotient in the characteristics and the diffusion terms are discretized by the method of fractional step difference. The computation of three-dimensional problem works efficiently by dividing it into three one-dimensional subproblems and every subproblem is solved by the method of speedup in parallel. Using a pair of different grids (coarse partition and refined partition), piecewise threefold quadratic interpolation, variation theory, multiplicative commutation rule of differential operators, mathematical induction and priori estimates theory and special technique of differential equations, we derive an optimal second order estimate in L²-norm. This numerical method is valuable in the simulation of semiconductor device theoretically and actually, and gives a powerful tool to solve the international problem presented by J. Douglas, Jr.     

新型Cd-苯并噻二唑类的金属有机骨架中的光诱导脱羧反应

基于相同配体2,1,3-苯并噻二唑-4,7-二羧酸(H2BTDC),通过不同的溶剂热反应,合成了两个新的3D结构的金属有机框架配合物1[Cd_4(BTDC)_4·5H_2O]和2[Cd_2(BTDC)_2(DMF)·1.5H_2O]。在配合物1的结构中存在两个相邻发色团(BTD单元)为反式平行的排列方式,距离为3.987,小于反式二聚物的理论计算值(4 ?)。在相关的紫外可见吸收光谱中观察到,配合物1在470nm处吸收带的能量低于单个BTD单元典型吸收带的能量。这些证据揭示了在配合物1的结构中存在反式苯并噻二唑二聚体。通过研究光照前后配合物1和2的稳态光谱及电子顺磁共振(EPR)光谱发现,这两个配合物中存在光诱导电子转移引起的光致变色效应,并产生了相应的阴离子自由基。相关的FT-IR光谱表明,由于这一自由基的产生,配合物1和2进一步发生了配体单元的脱羧反应,释放出二氧化碳气体(2331cm~(-1)、2361cm~(-1))。     

蓖麻油基巯烯基紫外光固化胶粘剂的研制与性能研究

以异佛尔酮二异氰酸酯(IPDI)、蓖麻油(CO)、丙烯酸羟丙酯(HPA)为原料,采用熔融缩聚法合成出端丙烯酸酯基预聚体;同时以CO和3-巯基丙酸(3-MPA)为原料采用酯化反应合成出端巯基光引发单体。将端不饱和双键聚氨酯丙烯酸酯预聚体与所制备巯基丙酸酯按一定比例复合,加入光引发剂,在紫外光照射下,预聚体中双键与光引发单体中巯基发生巯基-烯点击反应,制得聚氨酯丙烯酸酯固化膜。采用核磁共振氢谱(1 HNMR)、红外光谱(FT-IR)、热重分析(TG)和光量热系统(Photo-DSC)等手段对合成预聚体、巯基丙酸酯及固化膜结构和性能进行了分析表征。结果表明:在紫外光辐照下,预聚体中不饱和双键与巯基化合物中巯基间发生了自由基加成反应,固化时间在60s以内,且所制备UV固化膜具有良好的机械性能和热稳定性。     

Na3V2(PO4)3/C nanofiber bifunction as anode and cathode materials for sodium-ion batteries

Journal of Solid State Electrochemistry - Na3V2(PO4)3/C composite nanofibers are prepared successfully through a coaxial electrospinning technique and subsequent calcination. The diameter of the...